Energy efficient windows: ratings, costs and the rules
How window energy ratings work, double versus triple glazing, typical costs and savings, FENSA and CERTASS certificates, and conservation area planning rules.

New windows can make a home warmer, quieter and less draughty, but they are one of the more expensive energy upgrades, and the savings on bills are modest compared with insulation. This guide explains how to read window energy ratings, how double and triple glazing compare, what the work typically costs and saves, the certificate you must get, and the planning rules that catch people out.
How window energy ratings work
Window manufacturers rate their products on an A++ to E scale under the BFRC (British Fenestration Rating Council) scheme. The Energy Saving Trust explains that the rating looks at the whole window, not just the glass. It takes in heat lost through the unit, air leaking around it, and useful heat gained from sunlight.
You will also see a U-value, measured in W/m²K. This shows how easily heat passes through the window: the lower the number, the better. The Energy Saving Trust notes that the U-value does not capture everything, which is why the overall energy rating is the more useful guide when comparing quotes.
The legal minimum
Since 1 April 2002, building regulations have applied to all replacement glazing in England, according to the Planning Portal. Under the current Approved Document L, a replacement window in an existing home in England must achieve a U-value of 1.4 W/m²K or better, or a Window Energy Rating of at least band B, as summarised by the British Woodworking Federation. Any window an installer offers you should meet that as standard. Wales sets its own building regulations.
Double or triple glazing?
Double glazing has two panes of glass with a gap between them, filled with air or an inert gas such as argon. Triple glazing adds a third pane. The Energy Saving Trust says triple glazing can insulate better, cutting heat loss, draughts and noise further, but it costs more.
Points to weigh up:
- Cost against gain. A well rated double glazed unit already meets the legal standard. Ask installers to quote both and show the energy rating of each, so you can see what the extra money buys.
- Noise. If you live near a busy road or flight path, the noise reduction may matter as much as the energy saving.
- Frame material. uPVC frames are cheaper than hardwood. The frame affects the overall rating, so compare whole window ratings, not just the glass.
What it costs and what it saves
The Energy Saving Trust puts a set of A rated windows for a semi-detached house at around £4,800. Replacing full single glazing in a semi-detached home with A rated double glazing saves about £85 a year in Great Britain and about £140 in Northern Ireland, and around 290kg of carbon dioxide a year in Great Britain.
Those numbers show why windows are usually judged on more than payback. At £85 a year, a £4,800 job would take decades to recover from bill savings alone. Comfort, condensation, noise, security and replacing windows that are failing anyway are often bigger reasons to go ahead. If your main goal is lower bills, it may be worth looking first at loft and cavity wall insulation, which typically pays back much faster.
Cheaper alternatives
Secondary glazing adds a pane inside your existing window. The Energy Saving Trust describes three types:
- Film: the cheapest, usually fitted yourself, but the least durable and least effective.
- Magnetic panels: removable and moderately effective.
- Permanent units: made to measure, more expensive, and often suitable for listed buildings.
Heavy curtains, shutters and draught proofing also help, especially in older homes.
FENSA, CERTASS and your certificate
Because replacement windows fall under building regulations, the work must either be done by an installer registered with a competent person scheme, or be signed off by building control.
GOV.UK lists the schemes authorised for replacement windows and doors in existing homes as Blue Flame Certification, CERTASS, Certsure, FENSA, NAPIT and ASSURE. A registered installer can self-certify the work and you receive a certificate showing it complies.
Keep that certificate. When you sell, your buyer's solicitor will ask for evidence that replacement windows meet building regulations. FENSA says that without a certificate you may have to pay for building control to inspect the work. FENSA can reissue lost certificates for installations it registered.
If you use an unregistered installer, or fit windows yourself, you need approval from a building control body before the work, and a certificate of compliance afterwards. FENSA warns that windows found not to comply may need replacing, and the cost usually falls on the homeowner.
Planning permission and conservation areas
For a house, replacing windows with ones of a similar appearance does not usually need planning permission. PlanWatch highlights the situations where you need to check:
- Listed buildings: listed building consent is likely to be needed, covering frames, glass and fixings.
- Conservation areas: the look of windows is more tightly controlled. The Energy Saving Trust says work should preserve or enhance the area's character, and you may need windows that match the building's style.
- Article 4 directions: some areas have removed normal permitted development rights for window changes.
- Flats and maisonettes: householder permitted development rights do not apply in the same way, and a freeholder or management company may also need to agree.
- New upper floor side windows: these usually need obscure glass and must either be fixed or open only above 1.7m.
Building regulation paperwork such as a FENSA certificate is separate from planning, and does not show that planning permission was not needed. If in doubt, speak to your council's planning or conservation officer before you order.
Common mistakes to avoid
- Comparing quotes on price alone, without the energy rating of each window.
- Not checking the installer's competent person scheme registration before work starts.
- Losing the certificate, which can cause delays when you sell.
- Ordering for a listed home or conservation area before checking with the council.
- Forgetting fire escape rules: a replacement window must give at least the same means of escape as the old one, as the Planning Portal explains.
Next steps
- Check whether your home is listed, in a conservation area or covered by an Article 4 direction.
- Get at least three quotes, each showing the energy rating and U-value.
- Confirm the installer's scheme registration and the guarantee offered.
- Look at your EPC recommendations to see where windows rank against other upgrades.
UK Experts Online can introduce you to a specialist who can look at your home and talk you through the options. Visit our home upgrades page to find out more.
Ready to talk to an expert?
With energy prices rising, the home improvements that pay their way are the ones that cut your bills. Tell us what you are considering and we will match you with approved installers, and help you check which grants and loans you could get.
Sources
- Windows and doors, Energy Saving Trust, 20 May 2026
- Doors and windows: building regulations, Planning Portal, 13 November 2026
- Updated requirements for U-values in new build and existing dwellings, British Woodworking Federation, 13 November 2026
- Competent person scheme: current schemes and how schemes are authorised, GOV.UK, 17 September 2026
- Selling your home, FENSA, 13 November 2026
- My windows aren't compliant, FENSA, 13 November 2026
- Do I need planning permission for new windows?, PlanWatch, 13 November 2026
We check every figure and rule against official sources before publishing and update guides when things change. This guide explains how things work; it is not personal advice.



